Instrument Tour
R&S
®
RTP
35Getting Started 1337.9946.02 ─ 05
You can:
●
Configure masks and masks segments
●
Define mask test parameters
●
Configure actions triggered by mask violation
●
Configure the mask display
[History]
The sample memory contains several stored acquisitions before the current one,
which is shown in the display. Press the key to open the quick access "History"
dialog box, where you can view the stored acquisitions and use them for further
analysis. Press the key again to open the main "History" dialog box with more set-
tings and information.
The key is illuminated as long as a history acquisition or replay is displayed.
[FFT]
Opens and closes the FFT setup.
The key lights up if an FFT is active. You can switch off the FFT math waveform
using the [Signal Off] key.
4.3.7 Navigation Controls
The rotary knob and the navigation keys provide an alternative way to navigate in
dialog boxes and to enter numeric data.
See also: Chapter 5.8, "Using Dialog Boxes", on page 61
Keys and Controls
To Next Page
Loading...
