Trying Out the Instrument
R&S
®
ZNLE
51Getting Started 1323.2873.02 ─ 08
Keep the default "File Type" setting "Instrument with all Channel Setups" to
store the configuration of all channel setups.
Figure 5-3: Saving the instrument settings to a file
4. Tap the "Save" button.
The file MyMultiViewSetup.dfl is stored in the default directory
C:\ProgramData\Rohde-Schwarz\ZNL-FPL\Save.
To load stored instrument settings
You can restore the settings to the instrument at any time using the settings file.
1. Press the [Preset] button to restore the default instrument settings so you can
check that the stored user settings are actually restored afterwards.
Saving Settings
To Next Page
Loading...
