Operating the Instrument
R&S
®
ZNLE
54Getting Started 1323.2873.02 ─ 08
6 Operating the Instrument
This chapter provides an overview on how to work with the R&S ZNLE.
Remote control
In addition to working with the R&S ZNLE interactively, located directly at
the instrument, it is also possible to operate and control it from a remote
PC. Various methods for remote control are supported:
●
Connecting the instrument to a (LAN) network
●
Using the web browser interface in a LAN network
●
Using the Windows Remote Desktop application in a LAN network
●
Connecting a PC via the GPIB interface
How to configure the remote control interfaces is described in the
R&S ZNLE user manual.
● Understanding the Display Information........................................................... 54
● Accessing the Functionality.............................................................................56
● Entering Data.................................................................................................. 61
● Touchscreen Gestures.................................................................................... 63
● Getting Help.................................................................................................... 66
6.1 Understanding the Display Information
The following figure shows a measurement diagram. All different information
areas are labeled. They are explained in more detail in the following sections.
Understanding the Display Information
To Next Page
Loading...
