T
Timothy WallJul 25, 2025
What to do if Rohr Battery Charger does not work, no clamps are connected?
- JJohn MedinaJul 25, 2025
If the Rohr Battery Charger does not work because no clamps are connected, connect the clamps.
To Next PageTo Next PageWhat to do if Rohr Battery Charger does not work, no clamps are connected?
If the Rohr Battery Charger does not work because no clamps are connected, connect the clamps.
What to do if the Rohr Battery Charger shows a short circuit?
If the Rohr Battery Charger indicates a short circuit, check all connections to ensure they are secure and that no wires are exposed.
What to do if Rohr DFX-150 indicates reverse polarity connection?
If the Rohr Battery Charger shows reverse polarity, correct the polarity connections immediately.
What to do if the clamps on my Rohr DFX-150 are loose during charging?
If the Rohr Battery Charger clamps become loose during charging, ensure they are firmly connected to maintain a secure connection.
General| Brand | Rohr |
|---|---|
| Model | DFX-150 |
| Category | Battery Charger |
| Language | English |
Error code F1 indicates no clamps are connected or a short circuit.
Error code F2 signifies loose clamps during the charging process.
Error code F3 indicates that the battery voltage is excessively high.
Error code F4 suggests that the battery is faulty or cannot be charged.
Allows changing current settings between 2A, 8A, or 15A.
Enables selection of battery type: STD, AGM, or CAL.
Shows the current amperage on the LCD display.
Displays the voltage on the LCD display.
Used to repair sulphated batteries; exits upon second press.
Shows charging progress, moving during charge and stopping when full.
Indicates connection status: No Connection, Loose Connection, Reverse Polarity.
Signals bad battery condition or incorrect voltage selection.
