C
Craig GregoryJul 25, 2025
What to do if Rohr DFX-40 Battery Charger does not work, no clamps are connected?
- RRandall HickmanJul 25, 2025
If the Rohr Battery Charger does not work because no clamps are connected, connect the clamps.
To Next PageTo Next PageWhat to do if Rohr DFX-40 Battery Charger does not work, no clamps are connected?
If the Rohr Battery Charger does not work because no clamps are connected, connect the clamps.
What to do if the Rohr DFX-40 Battery Charger shows a short circuit?
If the Rohr Battery Charger indicates a short circuit, check all connections to ensure they are secure and that no wires are exposed.
What to do if Rohr DFX-40 indicates reverse polarity connection?
If the Rohr Battery Charger shows reverse polarity, correct the polarity connections immediately.
What to do if the clamps on my Rohr Battery Charger are loose during charging?
If the Rohr Battery Charger clamps become loose during charging, ensure they are firmly connected to maintain a secure connection.
General| Brand | Rohr |
|---|---|
| Model | DFX-40 |
| Category | Battery Charger |
| Language | English |
Indicates no clamps are connected or a short circuit has occurred.
Signifies loose clamps during the charging process.
Indicates that the battery voltage is too high for charging.
Suggests the battery is in bad condition and may need replacement.
