Confidential & Proprietary|© ROKIT Healthcare Inc. 2019. All Rights Reserved
Dr. INVIVO 4D User Guide
Preparing the Print Bed (i.e. with Petri Dish)
1. Select [New Creator K APP] > [Printer View].
2. In order to place a culture dish onto the print bed, please adjust the location of the bed by using arrows on the display. Please follow
images below.
1. Make sure the nozzle tip or needle doesn’t hit the printing bed (e.g. culture Dish).
32
INV-CHS-20191210
CAUTION
To Next Page
Loading...