Need help?Do you have a question about the Rokonet ORBIT-6 RP-206 and is the answer not in the manual?
Detailed steps for mounting the control panel and connecting various system components.
Instructions on how to restore the ORBIT-6 system to its original factory settings.
Step-by-step guide to enter installer programming mode and modify system parameters.
The primary code for authorized personnel to modify system parameters.
Configuration of installer codes and the master user code for system access and management.
Configures Zone 5 specifically as a Fire Zone for smoke detector integration.
Configures the digital communicator for central station reporting.
Configures quick arm, bypass, UO extender, and sounder output types.
General| Type | Wireless PIR Detector |
|---|---|
| Technology | PIR |
| Power Supply | 3V Lithium battery |
| Current Consumption | 15mA |
| Alarm Output | Wireless RF Signal |
| Tamper Switch | Yes |
| Operating Temperature | -10°C |
| Communication | RF Wireless |
| Battery Backup | Yes |
| Remote Control | No |
| Compatible Devices | Rokonet Security Panels |
To Next Page
