Do you have a question about the ROL ERGO EE Series and is the answer not in the manual?
Brand | ROL ERGO |
---|---|
Model | EE Series |
Category | Indoor Furnishing |
Language | English |
Essential safety precautions for operating an electrical table, including warnings and risk reduction.
Details on column system rating, maximum load, and duty cycle for commercial use.
Ensuring obstacle-free operation and initial control unit registration for correct positioning.
Specifies the input and output voltage, frequency, and current for the electrical system.
Guidance on assembling the desk base components and ensuring approved desktop/frame combinations.
Steps for connecting the handset, power supply, and performing an initial reset for operation.
Important notice regarding proper disconnection of components like power supply, cables, and handset.
Illustrates the motor driving assignment for a typical configuration, including power supply, cables, and handset.
Information that table components are sealed units; refer to vendor for service in case of failure.
Covers essential operations like overload and overheat protection, and basic movement controls.
Details on manual reset procedures for columns and handsets, often needed after part exchange.
Instructions for cleaning the table frame with microfiber cloth and proper storage practices.
Guidelines for inspecting legs, wires, plugs, and power supply for loose connections or damage.
Checks for screws and bolts, and troubleshooting cable connections for table operation.
Requirements for servicing double-insulated products, emphasizing care and qualified personnel.
Lists accessories like handsets and provides a part number chart for different stroke sizes.
Details on power supply dimensions, weight, and part numbers for various cable lengths.
Provides detailed dimensions for the column system with specific stroke lengths in max/min levels.
Provides detailed dimensions for the column system with a 470 stroke length in max/min levels.