Roland A-37 - Using the Unit Safely; Warning and Caution Notice Meanings; Understanding Safety Symbols; Essential Safety Precautions

2
g Pitch Bend Change
Status Second Third
EnH llH mmH
n=MIDI channel number: 0H – FH (ch.1 – ch.16)
ll, mm=value: 00H, 00H – 7FH, 7FH ( -8192 ~ +8191)
g System Realtime Message
i Active Sensing
Status
FEH
* This will be transmitted constantly at intervals of approximately 250ms
i Timing Clock
Status
F8H
i Start
Status
FAH
i Stop
Status
FCH
System Exclusive Message
g Data Transfer
A-37 transmit “Data set 1 (DT1)” message when Data Dump Function is activated
g Data set 1 (DT1) (12H)
Status Data byte Status
F0H 41H, 10H, 00H, 02H, 12H, aaH, bbH, ccH, ddH, ....eeH, sum, F7H
Byte Description
F0H Exclusive status
41H Manufacturer’s ID (Roland)
10H Device ID (dev => 10H)
00H Model ID (MSB) (Model A-37)
02H Model ID (LSB)
12H Command ID (DT1)