Roland CUBE-20GX Training Guide
STEP TWO: Show the LEAD Channel
1. Press the LEAD channel button.
2. Select a LEAD amp tone such as DISTORTION or EXTREME, depending
on the kind of music the customer wants to play.
3. Set the GAIN knob to about 5 to start out. Turn it clockwise for more
distortion and gain.
4. Play (or have the customer play) some chords and leads appropriate for a
lead guitar sound.
5. Experiment with the EQUALIZER, EFX, DELAY and REVERB to check
out their sounds.
To Next Page
Loading...
