5
Names of Things and What They Do
fig.01
1. INPUT Jack
Connect your guitar here.
2. SELECT Switch
Switches you between the CLEAN and LEAD channels.
You can confirm which channel is selected by checking the
indicator's color (JC CLEAN: green; LEAD: red).
The channel can be switched using the optional BOSS FS-5U
foot switch.
JC CLEAN Channel
This is a model of Roland’s famous JC-120 Jazz Chorus guitar
amplifier. The ultra-clean, ultra-flat sound offers a smooth.
This becomes more effective when used in combination with a
multi effector.
3. VOLUME Knob
Adjusts the JC CLEAN channel volume.
LEAD Channel
4. Type Switch
You can select from the following seven amp types:
ACOUSTIC
By combining acoustic guitar simulation with COSM
amplifier modeling technology, this original amplifier
model gives you a dynamic acoustic guitar sound using a
standard electric guitar.
BLACK PANEL
This is modeled on the classic Fender Twin Reverb
amplifier, used in a wide variety of musical styles, from
country to blues, jazz and rock. Exhibiting rich lows and a
bright high end.
BRIT COMBO
This is modeled on the Vox AC-30TB, the rock amplifier that
created the Liverpool sound of the '60s. It can produce a
broad range of sounds, from clean to overdrive, with
increased distortion and greater power in the low-midrange
when the amplifier's gain is boosted.
TWEED
This is modeled on the vintage Tweed Fender Bassman 4x10
combo. The amplifier's four 10-inch speakers produce a
clear upper-midrange with a fat low end, and its unique
crunch tones make it a favorite of blues-rock guitarists.
CLASSIC STACK
This is modeled on the sound and response of a Marshall
JMP1987. The legendary JMP1987 is renowned for its
smooth tone and presence-perfect for classic and hard rock.
METAL STACK
This is modeled on the Peavey EVH-5150. This is the high
gain amp, so even at low volumes, you can still get heavy
distortion and sustain.
R-FIER STACK
This is modeled on the MESA/Boogie Rectifier. This super
high gain amp is capable of producing slash metal, grunge,
and a wide range of other lead sounds.
Use of the RECORDING OUT/PHONES jack allows even
better reproduction of the COSM-modeled sound.
* All product names mentioned in this document are trademarks or
registered trademarks of their respective owners, and are not
related to Roland Corporation.
In this manual, these names are used as appropriate ways to
indicate sounds that are simulated using COSM technology.
5. GAIN Knob
Adjusts the LEAD channel's distortion level.
6. VOLUME Knob
Adjusts the LEAD channel volume.
EQUALIZER
7. BASS Knob
Adjusts the tone quality of the lower range.
8. MIDDLE Knob
Adjusts the tone quality of the midrange.
9. TREBLE Knob
Adjusts the tone quality of the upper range.
* Because COSM faithfully models the special features and
characteristics of a variety of amplifiers; no sound will be
produced when BASS, MIDDLE, and TREBLE knob are all set to
0 while the Type switch is set to BLACK PANEL or TWEED.
1 3 2 4 5 6
12 15
14131110
987
To Next Page
Loading...
Need help?
General
