Import User Program function
E-60/E-50 Music Workstation
r
183
(6) Press the field of the file whose User Programs you
want to import.
(7) Check again whether you really selected the file
you want to import, then press the [EXECUTE] field
to start the import operation.
This may take a while, because the conversion
requires quite a few calculations. Furthermore, the
User Program Finder database needs to be updated.
Be sure to wait until the “Operation Successful” mes-
sage appears.
Note: The E-60/E-50 creates no List file. The newly acquired
User Programs can be selected via the Finder, though – or
assigned to one of the 144 memory slots of the currently
active List.
(8) Press the [EXIT] button to return to the main page.
E-60_50_OM_UK.book Page 183 Thursday, June 22, 2006 10:06 AM
To Next Page
Loading...
