Roland E-80 - Page 244

MIDI
244
r
E-80 Music Workstation
(3) Press the [1]~[8] field that corresponds to the MIDI
Set you want to use (the two SELECT button icons
go dark).
You can also select a preset (“SELECT”) and work with
those settings, in which case all eight MIDI Set icons
go dark.
(4) Press the [EXIT] button to return to the main page.
MIDI Set selection at power-on
When you switch on the E-80, it automatically selects
default MIDI settings. If they do not match the settings
required for your setup, you can tell the E-80 which
MIDI Set it should recall when you switch it on:
(1) Press the [MENU] button.
The display changes to:
(2) Press the [UTILITY] field, followed by the [STARTUP]
field.
(3) Press the [MIDI≈SET] field and use the [DATA÷ENTRY]
dial or the [DEC]/[INC] buttons to select the MIDI
Set to be recalled when the E-80 is switched on.
(4) Switch on the [RECALL] field.
Switch off this button icon if no MIDI Set should be
recalled when the E-80 is switched on.
Note: If the E-80 is also set to recall a User Program that con-
tains a MIDI link, that selection is ignored if the MIDI SET
[RECALL] button icon is on.
(5) Press the [EXIT] button to return to the main page.