Roland EM-305 - Instrument Overview; Part Names and Descriptions

Part Names and Description
This
section
explains
the
names
and
operation
of
all
the
parts
on
the
EM-305/303.
If
you
need
more
details,
see
the
page
number
given
for
the
particular
function.
Switches
marked
[305]
are
available
only
on
the
EM-
305.
Front Panel
Bender/Modulation Lever
This lever changes the pitch of notes played and con-
trols vibrato (page 12).
Pitch Up/Down Switches
Modulation Switch
These switches change pitch and control vibrato
(page 13).
Rear Panel
MIDI Connector
This lets you connect the synthesizer to other
MIDI devices (page 34).
Tues Device colars.ing wetet ART 8.00 Tt
{al Ts DevICE MUST ACCEPT AMY INTEAFER!
IVED, INCLUDING RCTRRFERENCE THAT MAY
PEDALHOLD Jack
Connect a pedal switch to this jack (page 7).
This displays the music style number, tone
number, and other information.
OUTPUT Jack
This is used for sound output (page 7).
* For monaural output, use the L(MONO) jack.
PHONES Jack
Connect stereo headphones to this jack (page
6).
* With headphones connected, no sound is heard
from the synthesizer’s built-in speakers.
Music Style/Tone Charts
These charts list the names of the music styles and tones
that are available, and are a handy reference when se-
lecting a music style or tone.
POWER Switch
This turn the power on and off (page 8).
Connect the AC adaptor to this jack (page 6).
* Be sure to use only the AC adaptor supplied with
the EM-305/303.