15
Erase
The Erase tool allows you to remove notes or controller data from a phrase.
The Erase parameters are:
Part Group—• (See the explanation of this parameter on Page 13.)
Ch—
• (See the explanation of this parameter on Page 13.)
Measure—
• (See the explanation of this parameter on Page 13.)
For—
• (See the explanation of this parameter on Page 13.)
Status—
• (See the explanation of this parameter on Page 13.)
Range Min, Range Max—
• (See the explanation of these parameters on
Page 13.)
Delete
The Delete tool allows you to remove unwanted measures from a phrase.
The Delete parameters are:
Measure—• This parameter selects the first measure to be deleted.
For—
• This parameter determines the number of measures to be deleted,
starting with the one selected as the Measure value.
Copy
You can copy data from one area of a phrase and paste it into another using
the flexible Copy tool.
The Copy parameters are:
Part Group—• This parameter allows you to copy data from a specific
type of part. To do this, set Part Group to Internal, EXP 1, EXP 2, External.
Set it to All if you’d like to copy data from all of your parts.
Ch—
• This parameter lets you copy a specific MIDI channel’s data. If a
phrase contains only data for one part, or if you want to copy data from
all of the phrase’s MIDI channels, set Ch to All (Ch1-Ch16).
Src Measure (“Source Measure”)—
• This selects the first measure to be
copied.
For—
• This selects the number of measures to be copied, beginning with
the source measure.
Dst Measure—
• This sets the measure at which the copied data is to be
pasted.
To Next Page
Loading...
Need help?
General
