21
Fantom-S88
TEST MODE
Required equipment
1. Monitor speakers
2. MIDI cables
3. Audio cables
4. PCS-31 (stereo phone plug <=> monaural phone plug x 2)
5. Optical (angular) cable
6. Coaxial (PIN) cable
7. USB cable
8. SmartMedia (formatted; with protect label affixed)
9. SmartMedia (formatted; without protect label)
10. 256 MB DIMM (for DIMM specifications, refer to Main Specifications)
11. Wave expansion boards: SRX series, 4 pcs.
12. Computer (with USB connector; OS may be Windows Me, Windows
2000, or Windows XP)
13. Expression pedal (e.g., EV-5)
14. A device with digital audio I/F
15. Test device for applying a force of 3(kgf) (e.g., push-pull gauge)
or Weight (3 kg)
Starting up Test Mode
1. Turn on the power of the Fantom.
2. Press the [MENU] button to display the Menu window.
3. Turn the [VALUE] dial to select “Librarian,” and then press the [ENTER]
button.
4. Press the buttons in the order of [SHIFT] ,[4],[5] ,[1] ,[8], and the LCD
display will show as follows.
fig.0-1_70
5. When you press the [2] button (LINE TEST), the LCD display will show
as follows, and Test mode will start up.
fig.0-2_70
Basic operation in Test mode
Basic operation of the controls will be as follows.
[8] To the next test screen
[1] To the previous test screen
[SHIFT]+[8] Forcibly move to the next test screen
[SHIFT]+[1] Forcibly move to the previous test screen
[MENU] Select test items
When you enter the test item select screen, the LCD display will show as
follows.
fig.0-3_70
Use the [VALUE] dial, [INC][DEC] buttons, or [CURSOR] up/down buttons
to select a test item, and press the [ENTER] button.
Test items
Test the following twenty items.
0. Version Check
1. Mute
2. Device
3. DIMM
4. Expansion Board
5. MIDI
6. Card
7. Sound
8. D-Beam Adjustment
9. D-Beam
10. Pad Adjustment
11. Pad Velocity
12. Pad Aftertouch
13. Encoder
14. A/D
To Next Page
Loading...
