Roland FP-30X User Manual

8
Connecting the Piano and a Mobile Device via Bluetooth
If Pairing Does Not Succeed
If pairing is not successful in “Using the Piano with an App” (p. 7), try
steps 1–4 below.
1
Make sure that the piano’s Bluetooth function is
“O n .”
1. While holding down the [Function] button, press the
keyboard’s A0 key.
The piano’s Bluetooth function turns on.
2
Exit all apps on your mobile device.
Closing the app
1. Double-click the home button, and swipe up on the app
screen.
* The way to exit an app may dier depending on your mobile device. Exit the
apps using the method that’s appropriate for your mobile device.
3
If already paired, cancel pairing, and turn o the
Bluetooth function.
Cancelling the pairing
1. In the mobile device’s screen, tap the “i” located beside
“Connected,” and tap “Forget This Device.”
2. Turn the Bluetooth switch o.
4
Perform the pairing procedure of p. 7 from step 1.
MEMO
If checking these points does not solve the problem, please refer to the
Roland support website.
https://www.roland.com/support/
To pair your device with multiple pianos
For example, if you want to pair your mobile device with multiple
pianos located in a music school, you can specify an Bluetooth ID for
each piano to pair your mobile device with the desired pianos.
* When you make this setting, an ID number is added to
the end of the device name shown on the mobile device
(e.g., FP-30X Audio1).
1. Power-o the piano.
2. While holding down the [Volume] (left) button, long-press the
[L] button.
When all Volume indicators blink, release your ngers.
The number of times that the Volume indicators blink shows the currently
specied Bluetooth ID.
Value Volume indicator
0
Lit
1
Lit
Return to
beginning
Blink 1 time
9
Lit
Return to
beginning
Blink 9 times
10
Lit
Return to
beginning
Blink 1 time
11
Lit
Return to
beginning
Blink 1 time
Blink 1 time
87
Lit
Return to
beginning
Blink 7 times
Blink 8 times
Volume indicator status
Unlit
Lit Blink
3. While holding down the [Function] button, use the keyboard
to specify the Bluetooth ID.
Hold down
A0
2
0 2 3 5 7 8
1 4 6 9 87858381
868482
1
Value Explanation
0–87
Set to “0”: “FP-30X Audio” “FP-30X MIDI” (default value)
Set to “1”: “FP-30X Audio 1” “FP-30X MIDI 1”
The blinking of the Volume indicators changes according to the ID that you
specify.
You can also use the [Slow]/ [Fast] buttons to change the Bluetooth ID
value.
4. Press the [Volume] (left) button or [Volume] (right) button to
complete the setting.
* If you are pairing in an environment where there are multiple
pianos, we recommend that you turn on the power of the
mobile device and only those pianos that you want to pair (turn
o the power of other devices).

Roland FP-30X Specifications

General

Sound effects	Ambience, Brilliance
Tones quantity	24
Pedals quantity	3
RMS rated power	11 W
Speaker diameter	120 mm
Number of speakers	2
Maximum polyphony (notes)	256
Music memory capacity (songs)	30
Bluetooth version	4.0
Headphone outputs	1
USB connector type	USB Type-A, USB Type-B
Keys quantity	88 keys
Product color	Black
Tuning frequency	415.3 - 466.2 Hz
Power source type	AC
Power consumption (min)	16 W
Built-in display	No

Weight and Dimensions

Depth	284 mm
Width	1300 mm
Height	151 mm
Weight	14800 g