Roland FP-4 Midi Implementation

25
MIDI Implementation
●015c: Stereo Delay2
This is a stereo delay.
●015d: Stereo Delay3
This is a stereo delay.
●015e: Stereo Delay4
This is a stereo delay.
●015f: Stereo Delay5
This is a stereo delay.
No Parameter Value Description
1 Delay Left
Mode
0 - 1 ms, note When this is set to “note,” the effect is
synchronized with the tempo.
2 Delay Left 0 - 127 1-1270 ms Adjusts the time until the delay
sound is heard. (Hz)
3 Delay Left 0 - 21 note Adjusts the time until the delay
sound is heard. (note)
4 Delay Right
Mode
0 - 1 ms, note When this is set to “note,” the effect is
synchronized with the tempo.
5 Delay Right 0 - 127 1-1270 ms Adjusts the time until the delay
sound is heard. (Hz)
6 Delay Right 0 - 21 note Adjusts the time until the delay
sound is heard. (note)
7 Phase Left 0 - 1 Normal,
Inverse
Phase of the delay sound
8 Phase Right 0 - 1
9 Feedback Mode 0 - 1 Normal, Cross Selects the way in which delay sound
is fed back into the effect. (See the
figures above.)
10 Feedback #1 49 - 89 0- +80 % Adjusts the amount of the delay
sound that’s fed back into the effect.
11 HF Damp 0 - 17 200-8000 Hz,
Bypass
Adjusts the frequency above which
sound fed back to the effect is filtered
out. If you don’t want to filter out any
high frequencies, set this parameter
to Bypass.
12 Low Gain 0 - 30 -15- +15 dB Gain of the low frequency range
13 High Gain 0 - 30 -15- +15 dB Gain of the high frequency range
14 Balance #2 0 - 100 D100:0W-
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
15 Level 0 - 127 0-127 Output level
No Parameter Value Description
1 Delay Left
Mode
0 - 1 ms, note When this is set to “note,” the effect is
synchronized with the tempo.
2 Delay Left 0 - 127 1-1270 ms Adjusts the time until the delay
sound is heard. (Hz)
3 Delay Left 0 - 21 note Adjusts the time until the delay
sound is heard. (note)
4 Delay Right
Mode
0 - 1 ms, note When this is set to “note,” the effect is
synchronized with the tempo.
5 Delay Right 0 - 127 1-1270 ms Adjusts the time until the delay
sound is heard. (Hz)
6 Delay Right 0 - 21 note Adjusts the time until the delay
sound is heard. (note)
7 Phase Left 0 - 1 Normal,
Inverse
Phase of the delay sound
8 Phase Right 0 - 1
9 Feedback Mode 0 - 1 Normal, Cross Selects the way in which delay sound
is fed back into the effect. (See the
figures above.)
10 Feedback #1 49 - 89 0- +80 % Adjusts the amount of the delay
sound that’s fed back into the effect.
11 HF Damp 0 - 17 200-8000 Hz,
Bypass
Adjusts the frequency above which
sound fed back to the effect is filtered
out. If you don’t want to filter out any
high frequencies, set this parameter
to Bypass.
12 Low Gain 0 - 30 -15- +15 dB Gain of the low frequency range
13 High Gain 0 - 30 -15- +15 dB Gain of the high frequency range
14 Balance #2 0 - 100 D100:0W-
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
15 Level 0 - 127 0-127 Output level
No Parameter Value Description
1 Delay Left
Mode
0 - 1 ms, note When this is set to “note,” the effect is
synchronized with the tempo.
2 Delay Left 0 - 127 1-1270 ms Adjusts the time until the delay
sound is heard. (Hz)
3 Delay Left 0 - 21 note Adjusts the time until the delay
sound is heard. (note)
4 Delay Right
Mode
0 - 1 ms, note When this is set to “note,” the effect is
synchronized with the tempo.
5 Delay Right 0 - 127 1-1270 ms Adjusts the time until the delay
sound is heard. (Hz)
6 Delay Right 0 - 21 note Adjusts the time until the delay
sound is heard. (note)
7 Phase Left 0 - 1 Normal,
Inverse
Phase of the delay sound
8 Phase Right 0 - 1
9 Feedback Mode 0 - 1 Normal, Cross Selects the way in which delay sound
is fed back into the effect. (See the
figures above.)
10 Feedback #1 49 - 89 0- +80 % Adjusts the amount of the delay
sound that’s fed back into the effect.
11 HF Damp 0 - 17 200-8000 Hz,
Bypass
Adjusts the frequency above which
sound fed back to the effect is filtered
out. If you don’t want to filter out any
high frequencies, set this parameter
to Bypass.
12 Low Gain 0 - 30 -15- +15 dB Gain of the low frequency range
13 High Gain 0 - 30 -15- +15 dB Gain of the high frequency range
14 Balance #2 0 - 100 D100:0W-
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
15 Level 0 - 127 0-127 Output level
No Parameter Value Description
1 Delay Left
Mode
0 - 1 ms, note When this is set to “note,” the effect is
synchronized with the tempo.
2 Delay Left 0 - 127 1-1270 ms Adjusts the time until the delay
sound is heard. (Hz)
3 Delay Left 0 - 21 note Adjusts the time until the delay
sound is heard. (note)
4 Delay Right
Mode
0 - 1 ms, note When this is set to “note,” the effect is
synchronized with the tempo.
5 Delay Right 0 - 127 1-1270 ms Adjusts the time until the delay
sound is heard. (Hz)
6 Delay Right 0 - 21 note Adjusts the time until the delay
sound is heard. (note)
7 Phase Left 0 - 1 Normal,
Inverse
Phase of the delay sound
8 Phase Right 0 - 1
9 Feedback Mode 0 - 1 Normal, Cross Selects the way in which delay sound
is fed back into the effect. (See the
figures above.)
10 Feedback #1 49 - 89 0- +80 % Adjusts the amount of the delay
sound that’s fed back into the effect.
11 HF Damp 0 - 17 200-8000 Hz,
Bypass
Adjusts the frequency above which
sound fed back to the effect is filtered
out. If you don’t want to filter out any
high frequencies, set this parameter
to Bypass.
12 Low Gain 0 - 30 -15- +15 dB Gain of the low frequency range
13 High Gain 0 - 30 -15- +15 dB Gain of the high frequency range
14 Balance #2 0 - 100 D100:0W-
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
15 Level 0 - 127 0-127 Output level

Roland FP-4 Specifications

General

Polyphony	128 voices
Rated Power Output	12 W x 2
Effects	Reverb, Chorus
Recorder	Approx. 30, 000 notes
Display	3-digit 7-segment LED
Connectors	MIDI connectors (IN, OUT)
Power Supply	AC adaptor (included)
Included Accessories	AC Adaptor Power Cord Music Rest
Speakers	12 cm x 2