Roland GK-3B User Manual

DIVIDED PICKUP
DK3Ə3Z
Owner’s Manual
Thank you for purchasing the Roland GK-3B divided pickup.
Before using this unit, carefully read the sections entitled:
e USING THE UNIT SAFELY (page 2-3)
e IMPORTANT NOTES (page 3)
These sections provide important information concerning the
proper operation of the unit.
Additionally, in order to feel assured that you have gained a good
grasp of every feature provided by your new unit, Owner’s manual
should be read in its entirety. The manual should be saved and
kept on hand as a convenient reference.
Copyright © 2004 Roland CORPORATION
All rights reserved. No part of this publication may be reproduced in
any form without the written permission of Roland CORPORATION.

Roland GK-3B Specifications

General

Polarity Switch	Yes
Compatibility	Compatible with Roland GR series guitar synthesizers
Output	13-pin DIN
Controls	Volume
Attachment Method	Screws

Summary

USING THE UNIT SAFELY

About Warning and Caution Notices

Explains the meaning of WARNING and CAUTION notices used in the manual.

About the Symbols

Explains the meaning of various symbols used to convey important information.

IMPORTANT NOTES

Power Supply

Instructions regarding the power supply for the unit.

Placement

Guidelines for placing the unit to ensure proper operation and avoid damage.

Maintenance

Procedures and precautions for cleaning and maintaining the unit.

Additional Precautions

Further advice and precautions for using the unit safely and effectively.

Main Features

About the GK-3B Warranty

Panel Descriptions

1. Divided Pickup

Describes the pickup component that senses string vibrations.

2. GK Volume

Explains the control for adjusting the GK device volume.

3. GK Connector

Identifies the connector for GK devices.

4. Normal Pickup Input Jack

Describes the input jack for the bass's normal pickup signals.

5. Select Switch

Explains the switch for selecting between GK and normal outputs.

6. DOWN/S1 Switch

Describes the functionality of the DOWN/S1 switch.

7. UP/S2 Switch

Describes the functionality of the UP/S2 switch.

8. Power Indicator

Explains the indicator light that shows power supply status.

Attaching the GK-3B to the Bass

Precautions Before Installing

Important safety and handling precautions to observe before installing the GK-3B.

Adjusting the Divided Pickup

Guidance on adjusting the pickup's coil spacing to match bass string spacing.

Attaching the Divided Pickup

Methods and steps for physically attaching the divided pickup to a bass.

How to Use the Clearance Gauge

Instructions on using the provided gauge for accurate pickup height adjustment.

Attaching the Controller

Overview of methods for attaching the controller unit to the bass.

Attaching the Controller with the Holder

Detailed methods for mounting the controller using the provided holder.

Mounting on the Front of the Bass

Specific instructions for mounting the controller on the front of the bass.

Mounting Over the Bridge

Specific instructions for mounting the controller over the bass bridge.

Mounting on the Back of the Bass

Specific instructions for mounting the controller on the back of the bass.

Attaching with Double-sided Tape and a Screw

Method for attaching the controller using double-sided tape and a screw.

How to Connect the GK-3B

1. Connect GK device using GK cable.

Step to connect the GK device to the GK-3B using the GK cable.

2. Connect bass output to GK-3B input jack.

Connect the bass's normal pickup output to the GK-3B's input jack.

3. Turn on the power to the connected GK device.

Procedure for powering on the connected GK device.

Specifications

Controls

Lists the controls available on the GK-3B unit.

Indicator

Lists the indicators present on the GK-3B.

Connectors

Lists the connectors available on the GK-3B.

Weight

States the weight of the GK-3B unit.

Accessories

Lists the accessories included with the GK-3B.

Options

Lists optional accessories available for the GK-3B.

Dimensions

Provides the physical dimensions of the GK-3B.