Roland GK-3B - How to Connect the GK-3 B; 1. Connect GK device using GK cable.

‘How to Connect the GK-3B
* To prevent malfunction and/or damage to speakers * — The GK cable is a locking cable. When disconnecting
or other devices, always turn down the volume, and the cable, do not pull on it with undue force, but
turn off the power on all devices before making any instead release the lock and gently disconnect the
connections. cable. You can disconnect the cable simply and
* When all devices are properly connected, turn on the > easily by holding down the locking portion with
power to the various devices in the order specified your thumb and gently pulling on the plug.
below. Turning on devices in the wrong order may
result in malfunction and/or damage to speakers and
other devices.
1. Make sure that the power to the device
being connected is turned off, then
connect the device to the GK-3B’s GK
connector using the GK cable.
Before playing, be sure to wrap the cable around the
guitar strap near the end pin. This will prevent the
excess strain on the cable that can end up damaging
the bass or the GK-3B.
GK device
Connect the GK-3B only with dedicated GK
cable (supplied with Roland GK-compatible
devices and optional GK cables sold by
Roland). Use of any other cable may result in
damage or malfunction.
19