Roland GK-3B

Attaching the GK-3B to the Bass
Confirm
that
the
package
contains
all
of
the
following
parts
for
installing
the
GK-3B.
Flat-head Screw 3x16 mm
x 1 (for installing
the Controller)
Wood Screw 3x20 mm
x 2 (for installing
the Divided Pickup)
Spring
x 2 (for installing
the Divided Pickup)
Double-sided tape A
4 x 3 (for installing
the Controller)
Double-sided tape B
x 2 (for installing
the Divided Pickup)
Controller Cushion
x 1 (tor installing
the Controller)
Hoider A
Normal Guitar Cable
oneal
Pickup Cushion
x4
(for installing
the Divided Pickup)
Pickup Spacer A
(Thickness: 3 mm)
x2
(for adjusting the height of
the Divided Pickup)
Pickup Spacer B
(Thickness: 1 mm)
x5
(for adjusting the height of
the Divided Pickup)
Pickup Spacer C
(Thickness: 0.25 mm)
x4
(for adjusting the height of
the Divided Pickup)
Holder B
Hexagon Socket Screw Key
x1
—
Screw 5 x 20 mm
x 1 (for attaching
the Holder B)
Screw 5 x 8 mm
F x2 (for attaching
the Holder C)
Spring Washer
@. x2 (for attaching
the Hoider C)
Flat Washer
eB, x2 (for attaching
re the Holder C)
Clearance Gauge
Holder C
Screwdriver