Roland GR-1 - Page 59

1. Setting String Mode (1st//2nd) for Each String
2RD
ST
S 8 8 3 2 | eee String number)
Flashing part moved here by pressing CURSOR jj button
© Set the sixth string to play "2nd Tone only" with the STRING MODE | CHANGE |button, same
as you did in Step ®©.
ND
ST
S a 3 3 1 4——J4String number)
Changed with the STRING MODE [CHANGE] button
nen
" z
p
So now the first through fourth strings are assigned to the 1st Tone, and the fifth and sixth strings to
the 2nd Tone.
Q Press| EXIT/NO |(to return to the Play mode).
If you want to save the changes you have made to the Patch, perform a Patch Write
(zr P. 3-14). However,...
*:...do it soon. If you press STRING MODE [CHANGE | again from the Play mode, or select
a new Patch before saving the old one with a Patch Write, all individual string settings will
be Jost.