Roland GR-1 - Page 68

3. Reverb Chorus Editing in More Detail
: Make Chorus Effect Settings
How
(D press EDT [PATCH].
The * D" will flash.
© Press the PARAMETER] PREVIOUS |button one (1) time
T
i
The * A” will flash
(S Press [ENTER/VES
This is the screen we want to work in, so enter it.
The * B" will stop flashing.
e Now, by pressing PARAMETER | NEXT jand| PREVIOUS |. you can step through the various
chorus parameters that you will want to set.
& The settings themselves are made by pressing the VALUE [INC land buttons.
© Repeat Steps ( and $ as many times as necessary to make all the settings you want.
D When you're finished, press | EXIT/NO | however many limes it takes to return to the Play
mode.
* And as always, you need to save any changes you make with Patch Write (c7 P. 3-14)
4-12