Roland HP-203 - Recording Your Keyboard Performance

50
Recording
Here’s how to record just your own keyboard performance without using an internal
song.
fig.Panel-RecNew-e.eps
Performance Settings
1.
Press the [Int Song/Ext Song] button.
If the display does not show the following, press the [Int Song/Ext Song] button until this indication
appears.
fig.d-USr.eps
Alternatively, you can get “USr” to be displayed by holding down the [Int Song/Ext
Song] button and pressing the [ ] button.
2. Select the Tone to be played (p. 25).
3.
If necessary, sound the metronome.
Press the [Metronome] button (p. 37).
While listening to the metronome, adjust the song tempo and the time signature as desired (p. 37).
Settings for Recording
4.
Press the [ ] button.
The [ ] button lights, the [ ] button begins flashing, and the HP203 is put into recording
standby.
If you decide not to record, press the [ ] button once again.
Recording Your Keyboard Performance
HP203_e.book 50 ページ ２００６年１２月８日 金曜日 午前９時３３分