Operation Guide
Selecting the Parts that will Play
Here’s how to select the parts that will play.
To select the right-hand part Press the [Right] button so it’s lit.
To select the left-hand part Press the [Left] button so it’s lit.
To select the other parts Press the [Accomp] button so it’s lit.
To adjust the mute volume of a part
Hold down the button of the part whose volume you want to adjust,
and use the [–] [+] buttons.
page 30
Disabling the Buttons (Panel Lock)
Hold down the [Right] button until the upper right
of the display shows a “ ” symbol.
To cancel panel lock
Hold down the [Right] button until the “ ” symbol disappears.
page 47
Recording/Playback
Here’s how to play back or record a
song.
Return to the begin-
ning of the song
Press the [
] (Reset) button.
Play/Stop
Press the [
] (Play/Stop) button.
Enter recording-
standby mode
While stopped, press the [
] (Rec) button.
Record
While in recording-standby mode, press the
[
] (Play/Stop) button.
Rewind
Press the [
] (Bwd) button.
Fast-forward
Press the [
] (Fwd) button.
To play all songs (all song play)
While holding down the [Song] button, press the [ ] (Play/
Stop) button.
To make a new recording
1. Select the tone that you want to play.
2. Press the [ ] (Rec) button.
3. Press the [ ] (Play/Stop) button to start
recording.
4. Press the [ ] (Play/Stop) button to stop
recording.
To overdub
1. Select the tone to be played.
2. Select the song to be dubbed.
3. Press the [ ] (Rec) button.
4. Press the [+] button.
5. Press the button of the part that you want to record,
making it blink.
6. Press the [ ] (Play/Stop) button to start
recording.
7. Press the [ ] (Play/Stop) button to stop
recording.
page 32page 28
page 29
page 32
page 35
13
Operation Guide Panel Descriptions Before You Play Performing Practicing Piano Designer
Convenient Functions
Appendix
Function Mode
To Next Page
Loading...
