EasyManua.ls Logo

Roland HPi-6 - Assigning a Marker in the Middle of a Measure (Resolution)

Roland HPi-6
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
61
Practicing
Moving an Assigned Marker
After adding markers to a song, you can then move to the location where Marker A
is set by holding down the cursor left button and pressing either the
[ (Bwd)] or [ (Fwd)] button.
To adjust the location of marker B, hold down the cursor right button and press
the [ (Bwd)] or [ (Fwd) button.
Moving to the Location of an Assigned Marker
After assigning a marker in the song, press either cursor left or right button to
move (jump) to the location of the marker.
Playing Repeatedly between Markers
After assigning both markers A and B, press the cursor down button to turn
<Repeat> to “On.”
When you press the [ (Play/Stop)] button, playback will repeat between the
markers.
Deleting a Marker You’ve Assigned
Hold down the [ ] button, and press the cursor left button to delete marker
A, or press the cursor right button to delete marker B.
Assigning a Marker in the Middle of a Measure
(Resolution)
A marker can be assigned in the middle (at the beginning of a beat) of a measure.
1.
Press the [Count/Marker] button to display the “Count” screen, then press
the [ ] button.
2.
Press the [ ] button once more to access the “Resolution” screen.
fig.d-MarkerReso-e_50
3.
Press the cursor up or down button to change the setting.
Item
Setting
Resolution
Measure
Markers will be assigned to the beginning of a
measure.
Beat
Markers will be assigned to the beginning of a beat.
If you want to assign a marker to the beginning of a
beat, assign the marker while playing back the song.
If you use Repeat Playback
without assigning marker A or
B
The entire selected song will be
played back repeatedly.
If you use Repeat Playback
when only marker A is
assigned
The song will play back
repeatedly from marker A to the
end of the song.
If you use Repeat Playback
when only marker B is
assigned
The song will play back
repeated from the beginning of
the song to marker B.
If <Repeat> in the “Marker”
screen is turned “On,” you can
press the [ (Notation)]
b
utton to display the Notation
screen and play back
repeatedly. Anything you
want to do that involves
markers, including moving to
a particular marker, is
accomplished within the
“Marker” screen.
HPi-6-e.book 61 ページ 2005年11月15日 火曜日 午後3時49分

Table of Contents

Related product manuals