OUTPUT
The JV
features two pairs of stereo output jacks. At the
factory, the sound is routed to the MAIH OUTPUT
jacl<s. You
can
change this setting to
either
the SUB OUTPUT jac!<s or
both the MAIN
OUTPUT
and SUB OUTPUT jacks
(See
P.5-4.).
O
O
©.
.0
o
o
MAIN OUTPUT
SUB OUTPUT
MAm OUTPUT
When using these jacks,
the chorus/reverb effect is
part of the output
signal.
The
pan setting
(See P.6-45,
7-11), the chorus (See P.6-9, 7-6) and the reverb
(See P.6-11,
7-8)
applied to the Part and
Patch determine the stereo
position and
the
effect to
be used respectively.
MAIN
OUTPUT
m^m^mm^&^mms^
When using both pairs of
output jacks, the chorus/reverb effect is removed from the output signal.
The settings of the
Patch,
Performance and Rhythm Set determine
the specific output assignments
(MAIN OUTPUT or SUB
OUTPUT).
#
Patch
Within
a Patch, the
output
destination for
each
Tone can
be set.
#
Performance
Within
a
Performance, the output destination
for
each Part can
be set. The
output
destination can also be set for
each Patch assigned
to
a
Part. In this
case, the output
destination
is that set
for
each
Tone. (For Part
8,
each Rhythm
Tone has
its own
assignment.)
#
Rhythm
Set
The
output
destination can be set for
each
Rhythm Tone.
To Next Page
Loading...
