To Next PageTo Next Page
Need help?Do you have a question about the Roland KATANA-AIR and is the answer not in the manual?
General| Type | Guitar Amplifier |
|---|---|
| Power Output | 30W |
| Channels | 5 (Acoustic, Clean, Crunch, Lead, Brown) |
| Amp Modeling | Yes |
| EQ | 3-band EQ |
| Speaker | 1 x 8" |
| Effects | Modulation, Delay, Reverb |
| Inputs | 1 x 1/4" (Guitar), 1 x 1/8" (Aux) |
| Outputs | 1 x 1/8" (Headphones) |
| USB | Yes |
| Bluetooth | Yes |
| Wireless | Yes |
| Features | Battery powered |
Power on the KATANA-AIR unit and mobile device before proceeding with connection.
Navigate to mobile device settings and turn on the Bluetooth function.
Start the BOSS TONE STUDIO app and tap the CONNECT button to establish a connection.
If prompted by the OS, confirm the Bluetooth pairing request to finalize the connection.
Verify the Bluetooth indicator on the KATANA-AIR unit is active (blinking or lit).
Ensure you do not tap "KATANA-AIR MIDI" or other incorrect model names during the initial scan.
Access Bluetooth settings, find "KATANA-AIR MIDI", tap its gear icon, and select "Unpair".
Turn the Bluetooth switch off, then turn it back on again to reset the connection state.
Close all running applications on the mobile device and re-attempt the connection procedure from step 1.
Power off the mobile device and KATANA-AIR unit, wait briefly, then power them on again.
Follow specific button press sequences on the KATANA-AIR unit to set its Bluetooth ID to '1'.
Utilize alternative button press sequences to set the KATANA-AIR unit's Bluetooth ID to '2'.
Long-press the unit's button to enter standby, then power on to activate the new Bluetooth ID setting.
