Roland M-480 - Page 10

10
Functionality Added in M-480 Ver. 1.6
You can make the unit always boot in the GUEST mode when you turn it on.
1. Call up the USER screen
Press the [DISP] in USER section to call up the USER screen.
fig.user-screen.eps
2. Make it to boot in GUEST mode
Check [Startup as GUEST]. While this is checked, the unit will always boot in GUEST mode setting.
fig.start-up-as-guest.eps
You can edit the user level to prohibit the specified operations. The user level settings can be carried out by the users other than
ADMIN.
* If you are using with ADMIN and keep the user preferences, create a new user setting that takes over the current settings.
Create a New User Setting that Takes Over the Current Settings
1. Connect a USB memory
Connect a USB memory to the USB MEMORY port of the M-480.
2. Call up the USER screen
Press [DISP] in USER section to call up the USER screen.
fig.user-screen.eps
The Expanded User Settings
Always Boot in GUEST Mode
Prohibit Specified Operations