Roland M-GS64

a
en
See
@ Rx GS Reset (GS Reset Receive Switch) : On/Off
@ Rx GM On (General MIDi System On Receive Switch)
:On/Off
General MIDI System On and GS Reset are MIDI Exclusive mes-
sages that are included at the beginning of song data bearing the
General MIDI or GS logo. When the song data is played back
from the beginning, these messages cause the sound generating
unit to reset itself to its standard settings, ensuring that the song
data will be played back correctly. This means that when playing
back song data bearing the General MIDI or GS logo, you should
leave this pararneter On. If it is turned Off, General MIDI System
On and GS Reset messages will be ignored.
@ Mode Set : Mode! /Mede 2
Mode 1 (Mdl) Single Module Mode will be selected.
Mode 2(Md2) Double Module Mode will be selected.
* When this parameter is selected, the Monitor indicator will
blink. To finalize the selected setting, press the Enter button.
The selection for Single or Double module mode is remem-
bered even when the power is tumed off. Turning the power
off and then on again will not affect the operating mode.
Be aware that when you change the operating mode, the set-
tings of each Part will be initialized (GS Reset).
19