Roland M-GS64

[ Level Meter Function
When the indicator for a Patch button is lit, the Select indicator
works like a level meter for the unit. It normally indicates the
total level for all Patches together, but when you're monitoring a
Part it indicates only the level for that Part.
| Selecting a Patch in Edit Mode
Even while in Edit mode, you can select Patches by holding
down the Select button and pressing the Value ~@ or Be bui-
tons.
[ Parameter Reverse Mode
This function reverses the direction in which the Select button
selects parameters.
Normally, pressing the Select button moves you through the
parameters from top to bottom, but when this function is turned
on, the movement will be from bottom to top.
While holding down the Part button, press the Select button to
alternate between on and off.
[ The Preview Function
If you hold down the Patch button and press the Monitor button,
the currently selected sound will be played. You can specify the
pitch and volume of the sound (p. 18). This is a convenient way
to check sounds or tuning when no keyboard is connected.
[ Move Part Function
This function lets you jump to Parts A01, A16, BO1, or B16.
Hold down the Part button and press the Fl button: move to AQ]
Hold down the Part button and press the F2 button: move to Al6
Hold down the Part button and press the F3 button: move to BO1
Hold down the Part button and press the F4 button: move to B16
Handy Functions
[ Patch Only Mode
When this mode is selected, you can select Patches and Sound
Maps more simply. If you will not be using Edit mode, operation
will be more convenient if you select this mode.
@ Procedure
While holding the Part button, press the Patch button and the
Patch indicator will begin blinking to show that the M-GS64 is in
Patch Only mode.
At this time, the buttons on the front panel will be assigned to
the following functions.
<o Cc : Select Parts
Fi, F2 : Select Program Numbers
F3, F4 : Select Bank Numbers
Select : Select Sound Maps
Patch
Patch Select Mode
o oO
Pome flashing C) oO oO
oO Select bal iz
- Progurain # +
aOQec
zOe
Map Select - Bank # +
To return to normal Patch Select mode, press the Patch button.