Roland VR-50HD MK II - User Manual

01
Reference Manual
© 2019 Roland Corporation
Connect the ground terminal to an external ground point before use
In order to stabilize the connections between this unit and external devices, and to prevent malfunctions or faulty operation caused by static
electricity, you should connect the ground terminal of this unit to an external ground point before use. Use the included ground cord to make
this connection.
Ground terminal
* Before connecting the ground cord or any external devices, you must minimize the volume of all devices and
turn o the power of all devices in order to prevent faulty operation or malfunctions.
* Unsuitable places for connection
5
Water pipes (may result in shock or electrocution)
5
Gas pipes (may result in re or explosion)
5
Telephone-line ground or lightning rod (may be dangerous in the event of lightning)
* If you connect the ground terminal to an external ground point, a slight hum might occur.
* If you do not understand how to connect the ground terminal, contact the nearest Roland Service Center.

Roland VR-50HD MK II Specifications

General

Brand	Roland
Model	VR-50HD MK II
Category	Recording Equipment
Language	English

Summary

Panel Descriptions

Top Panel Controls

Details the controls and indicators on the top panel of the audio mixer section.

Video Mixer Section Controls

Details the controls and indicators for the video mixer section.

Common Controllers

Rear Panel Connectors

Details the input/output connectors and ports located on the rear panel of the unit.

Basic Operations

Power On;Off Procedure

Explains the correct procedure for powering the unit on and off.

Menu Navigation and Settings

Details how to navigate the menu, select items, and edit settings.

Video Input;Output Settings

Setting Output Format

Assigning Video Sources

Assigning Video Buses to Outputs

Video Operations

Switching Video Sources

Explains how to switch between video input 1-4 signals using transition effects.

Video Composition Operations

Compositing with Picture-in-Picture (PinP)

Explains how to composite an inset screen onto the background video.

Compositing with Key Effects

Explains how to use key effects for transparent compositing.

Compositing Logo;Image (Luminance Key)

Explains how to use luminance key to overlay a logo or image.

Compositing Subject;Background (Chroma Key)

Explains how to use chroma key to composite a subject against a background.

Audio Operations

Assigning Audio Sources to Channels

Adjusting Input Gain (Sensitivity)

Details how to adjust input gain for appropriate audio levels.

Adjusting Volume Balance

Explains how to adjust the volume balance of inputs and the overall output.

Live Streaming

Outputting Video;Audio for Streaming

Explains how to output video/audio via USB to a computer for live streaming.

Menu List

Audio Settings Overview

Lists and explains audio settings for channels 1-4, including Gate and Compressor.

Audio Channels 1-4 Settings

Details input audio settings for channels 1-4, such as Gain, Level, and effects.

Audio Channels 5;6-11;12 Settings

Details input audio settings for channels 5/6-11/12, including Follow and Pan.

Output Screen Settings

Details settings for MAIN, AUX 1, AUX 2 outputs, and output bus assignments.

EQ;Dynamics Screen Settings

Details settings for the EQ and Dynamics (Compressor/Limiter) effects.

Video Input 1-4 Screen Settings

Details settings for video inputs, including Scaling, Color Correction, and EDID.

Video Input Still and Output Screens

Composition Setup Screen

Details settings for video composition layers, sources, and editing.

System Settings

USB Streaming Screen

Details settings for USB streaming, including audio, video, and connection status.

Setup Screen Options

Network Settings

LAN Screen Configuration

Explains network configuration for the LAN interface.

LAN;RS-232 C Command Reference

LAN Interface Communication

Describes using Telnet for remote control over a LAN connection.

RS-232 C Interface Details

Details the RS-232C interface, pin layout, and communication standards.

List of Control Commands

Appendices

Troubleshooting Common Issues

Provides solutions for common video, audio, and other problems.

Main Technical Specifications

Audio Specifications Details

Video Block Diagram

Audio Block Diagram