Roland VR-50HD MK II - Output Screen Settings

41
Menu List
Output Screen
(Press the MAIN [SELECT] button, or [MENU] button0Audio <Output>)
Here you can make settings for the output audio.
Menu item Value (bold text: default value) Explanation
MAIN Adjusts the main output audio.
Level -Inf– +10.0dB
Adjusts the output volume.
* This can also be adjusted by the [MAIN] fader.
Solo OFF, ON Turns the solo function on/o. Only the audio for which this is “ON” is heard in the headphones.
Mute OFF, ON Turns the mute function on/o. If this is “ON,” the audio is temporarily silenced.
AUX 1 Adjusts the audio of the AUX 1 bus.
Level -Inf– +10.0dB Adjusts the output volume.
Solo OFF, ON Turns the solo function on/o. Only the audio for which this is “ON” is heard in the headphones.
Mute OFF, ON Turns the mute function on/o. If this is “ON,” the audio is temporarily silenced.
AUX 2 Adjusts the audio of the AUX 2 bus.
Level -Inf– +10.0dB Adjusts the output volume.
Solo OFF, ON Turns the solo function on/o. Only the audio for which this is “ON” is heard in the headphones.
Mute OFF, ON Turns the mute function on/o. If this is “ON,” the audio is temporarily silenced.
Mon Level (*4) -Inf–0.0– +10.0dB Adjusts the volume that is output from the AUX 2/MONITOR OUT jacks.
(*4) This is valid if the Output Bus’s “AUDIO AUX 2” is “MON.”
Output Bus
AUDIO MAIN MAIN, AUX 1, AUX 2
Species the audio bus that is assigned to each output connector.
MAIN This mixes and outputs all input audio (main output).
AUX 1
This mixes and outputs only the input audio that is sent to the AUX 1 or AUX 2 bus. This
allows you to output audio that is dierent than the main output.
AUX 2
MON
This outputs the same audio as the headphones. Use “Mon Level” to adjust the volume.
* This can be set only for the AUX 2/MONITOR OUT jacks.
AUDIO AUX 1 MAIN, AUX 1, AUX 2
AUDIO AUX 2
MAIN, AUX 1, AUX 2
MON
SDI PGM MAIN, AUX 1, AUX 2
SDI AUX MAIN, AUX 1, AUX 2
HDMI PGM MAIN, AUX 1, AUX 2
HDMI AUX MAIN, AUX 1, AUX 2
PHONES MAIN, AUX 1, AUX 2