Roland VR-50HD MK II - Page 40

40
Menu List
Menu item Value (bold text: default value) Explanation
Compressor When you touch <Edit>, a detailed screen for the eect appears.
Compressor OFF, ON
Turns the compressor on/o.
Eect
Audio that exceeds the specied threshold level is compressed. This reduces the dierence
between the maximum volume and minimum volume, making the audio more comfortable for
listening.
Threshold -50– -8–0dB
Species the level used as the threshold at which the compressor is applied. Compression is applied to
audio that exceeds the threshold.
Ratio
1.00 : 1, 1.12 : 1, 1.25 : 1
1.40 : 1, 1.60 : 1, 1.80 : 1
2.00 : 1, 2.50 : 1, 3.20 : 1
4.00 : 1, 5.60 : 1, 8.00 : 1
16.0 : 1, INF : 1
Species the degree of compression applied to the audio. The state in which no compression is applied is
dened as “1.”
Attack 0–30–100ms Adjusts the time from when audio exceeding the threshold is input until when compression begins.
Release 30–250–5000ms Adjusts the length of time until compression ends after audio falls below the threshold.
Makeup -40–0–40dB Adjusts the output volume level after applying the compressor.
Equalizer When you touch <Edit>, a detailed screen for the eect appears.
Equalizer OFF, ON
Turns the equalizer on/o.
Eect
This is a 4-band parametric equalizer. It lets you shape the character of the sound by boosting or
cutting four frequency regions.
High -15.0–0.0– +15.0dB Boosts or attenuates the high band.
Frequency 1.0–10.0–20.0kHz Adjusts the center frequency when changing the tone quality in the high band.
Hi-Mid -15–0– +15dB Boosts or attenuates the high-midrange band.
Frequency 20.0Hz–2.0kHz–20.0kHz Adjusts the center frequency when changing the tone quality in the high-midrange band.
Q 0.3–1.0–16.0 Adjusts the width of the frequency band when boosting or attenuating high-midrange band.
Lo-Mid -15–0– +15dB Boosts or attenuates the low-midrange band.
Frequency 20Hz–500Hz–20.0kHz Adjusts the center frequency when changing the tone quality in the low-midrange band.
Q 0.3–1.0–16.0 Adjusts the width of the frequency band when boosting or attenuating low-midrange band.
Low -15–0– +15dB Boosts or attenuates the low band.
Frequency 20Hz–100Hz–2.0kHz Adjusts the center frequency when changing the tone quality in the low band.
FX (*3)
FX OFF, ON Turns the voice changer or anti-feedback on/o.
Voice Change
Anti-Feedback
Selects the voice changer or anti-feedback.
Voice Change Transforms the pitch or character of the voice that is input from the mic.
Anti-Feedback
Decreases the unpleasant acoustic feedback that occurs when a mic is brought near a speaker.
Voice Change (*3) When you touch <Edit>, a detailed screen for the eect appears.
Pitch -12– +12 Adjusts the pitch of the voice in semitone steps. A setting of “0” is the original pitch.
Formant -10– +4– +10
Adjusts the character (formant) of the voice. Settings in the negative (–) direction produce a more
masculine vocal character, and settings in the positive (+) direction produce a more feminine vocal
character. A setting of “0” is the original voice.
Robot OFF, ON If this is “ON,” the voice is held at a xed pitch, creating a mechanical robot-like impression.
Mix 0–100 Adjusts the balance between the unprocessed voice (0) and the voice processed by the eect (100).
(*3) Only for channels 5/6 and 7/8. This can be set if “Input” is “MIC.”