Roland VR-50HD MK II - Loading a Still Image from a USB Flash Drive

15
Video Operations
Loading a Still Image from a USB Flash Drive
Here’s how to load a still image from a USB ash drive into the unit.
NOTE
5
Up to four still images can be temporarily saved in the unit.
When you turn o the power, the still images are deleted.
5
Still images cannot be scaled. In advance, you must prepare
still images of the resolution that is appropriate for your
output format.
5
When using a USB ash drive for the rst time, you must
format it using this unit (p. 35).
5
Never turn o the power or remove the USB ash drive while
the message “Processing.” is shown.
5
Depending on the USB ash drive, recognition of the ash
drive might take some time.
Formats supported for loading
Format Windows Bitmap le (.bmp), 24-bit color, uncompressed
Resolution Maximum 1920 x 1080 pixels
File name
Up to eight single-byte alphanumeric characters
* The extension “.bmp” must be added.
Loading a still image
1. Save the still image in the root directory of the USB ash
drive.
2. Connect the USB ash drive containing the still image to
the USB MEMORY port.
3. Press the [MENU] button
0
touch Video <Still Load/
Delete>.
4. Touch a box to specify the save-destination for the still
image.
Boxes in which a still image is saved show the
le name of the still image.
5. Touch <Load>.
6. Touch the still image that you want to load.
If you want to cancel the operation, press the [EXIT] button.
7. Press the [ENTER] button.
The still image is loaded into the unit.
8. Press the [MENU] button to close the menu screen.
MEMO
5
If the le size of the still image is large, it may take some time
for it to load.
5
You can make the previously-loaded still image be
automatically loaded at startup. Save the same le in the root
directory of the USB ash drive, and start this unit with the
USB ash drive connected.
If the still image would not be loaded correctly, try reloading
it from the USB ash drive. Press the [MENU] button
0
touch
Video <Still Load/Delete>
0
<Reload>.
5
To delete a still image, press the [MENU] button
0
touch Video
<Still Load/Delete>
0
select the still image that you want to
delete
0
touch <Delete>.