Roland VR-50HD MK II - Test Pattern Screen; Still Load;Delete Screen; Capture;Freeze;Logo Screen

52
Menu List
Test Pattern screen
(Press the [MENU] button0touch Video <Test Pattern>)
Menu item Value (bold text: default value) Explanation
Test Pattern
OFF, 75% Color Bar. 100% Color Bar
Ramp, Step, Hatch, Frame
Species the test pattern.
Test Tone OFF, ON Turns the test tone on/o.
Still Load/Delete screen
([MENU] button0Video <Still Load/Delete>)
Here you can load a still image from a USB ash drive, or delete a loaded still image.
Menu item Value (bold text: default value) Explanation
Load —
Shows a list of the still images saved in the root directory of the USB ash drive. You can select a still
image and load it into the unit.
Formats supported for loading
Format Windows Bitmap le (.bmp), 24-bit color, uncompressed
Resolution Maximum 1920 x 1080 pixels
File name
Up to eight single-byte alphanumeric characters
* The extension “.bmp” must be added.
* The still image is temporarily saved in the unit. When you turn o the power, the still image is deleted.
* You can make the previously-loaded still image be automatically loaded when this unit starts. Save
the same le in the root directory of the USB ash drive, and start this unit with the USB ash drive
connected.
Delete — Deletes the still image that is loaded into the unit.
Reload — Reloads a still image from the USB ash drive.
Capture/Freeze/Logo Screen
([MENU] button0Video <Capture/Freeze/Logo>)
Here you can specify the function of the [FREEZE/USER LOGO] button, and capture a still image from the video output.
Menu item Value (bold text: default value) Explanation
Freeze/User Logo
Mode
Species the function of the [FREEZE/USER LOGO] button.
Freeze Temporarily pauses the program output video (freeze function).
User Logo Temporarily stops the program output, and outputs the specied still image.
Still
Touch to access the Still Select screen.
1–4 Selects the still image that is assigned to the [FREEZE/USER LOGO] button.
Output Capture
Source PGM, AUX Species the video bus on which still image capture is used.
Still
Touch to access the Still Select screen.
1–4
Species the save-destination for the captured still image.
* The still image is temporarily saved in the unit. When you turn o the power, the still image is deleted.
Execute — Capture a still image from the output video.