Roland VR-50HD MK II - Page 51

51
Menu List
PinP/KEY screen
PinP
Menu item Value (bold text: default value) Explanation
PinP OFF, ON Enables (ON) or disables (OFF) PinP settings.
Size 10.0–25.0–100.0% Adjusts the size (zoom) of the inset screen.
Position H -100.0– -30.0– +100.0% Adjusts the horizontal position of the inset screen.
Position V -100.0– -25.0– +100.0% Adjusts the vertical position of the inset screen.
Cropping
Cropping Original, 4 : 3, 16 : 9, Manual
Species the type when cropping the inset screen.
If “Manual” is selected, cropping is done according to the “Size H” and “Size V” settings.
Size H -2000–0– +2000 Adjusts the horizontal size.
Size V -2000–0– +2000 Adjusts the vertical size.
View Use the following items to adjust the video that is shown in the inset screen.
Zoom 100.0–1000.0% Adjusts the zoom.
Position H -1920–0– +1920
Adjusts the horizontal position.
Position V -1080–0– +1080
Adjusts the vertical position.
Border Use the following items to adjust the border that is added to the inset screen.
Red 0–128–255 Adjusts the red level of the border color.
Green 0–128–255 Adjusts the green level of the border color.
Blue 0–128–255 Adjusts the blue level of the border color.
Width 0–5–63 Adjusts the width of the border.
KEY
Menu item Value (bold text: default value) Explanation
KEY OFF, ON Enables (ON) or disables (OFF) the key settings.
Type
Species the key type (extraction color) used during key composition.
Lumi White Makes white portions transparent according to brightness.
Lumi Black Makes black portions transparent according to brightness.
Chroma Blue Uses a color threshold to make blue transparent.
Chroma Green Uses a color threshold to make green transparent.
Level 0–32–255 Adjusts the degree of extraction (transparency) for the key.
Gain 0–255 Adjusts the degree of edge blur (semi-transmissive region) for the key.
Hue (*14)
Width -128–0– +127 Adjusts the hue width for the key color.
Fine -128–0– +127 Adjusts the center position of the hue for the key color.
Saturation (*14)
Width -128–0– +127 Adjusts the saturation width for the key color.
Fine 0–255 Adjusts the center position of saturation for the key color.
(*14) This is valid when “Type” is “Chroma Blue” or “Chroma Green.”
Composition Layer screen
Menu item Value (bold text: default value) Explanation
Layer
PinP Bottom, Middle, Top
Specify the order of layering.
For details on operation, refer to “Changing the order of layers” (p. 18).
PinP/KEY Bottom, Middle, Top
STILL KEY Bottom, Middle, Top