Roland VR-50HD MK II - Switching the Video Automatically (Video Follows Audio); Fading-In;Out the Program Output Video

16
Video Operations
Switching the Video Automatically
(Video Follows Audio)
This detects the audio that is input from a mic, and automatically
switches to the specied video according to the volume (Video
Follows Audio function).
For example, if you’re streaming a talk show or a conversation, you
can use this to switch between a closeup of the individual who is
speaking and a wide shot of both people when neither person is
speaking.
1. Press the [MENU] button
0
touch Audio <Video Follows
Audio>.
2. Touch a menu item, and edit its setting.
Switch pages, and set the necessary menu items.
Menu item Explanation
Target
Species the video that is output when audio is
detected.
Threshold
Species the reference level at which the Video Follows
Audio function operates. When audio that exceeds this
threshold is detected, the video is switched.
Mix
Species the video that is output when audio is
detected in multiple mics. If this is “OFF,” video is
switched in the order in which audio is detected.
Silent
Species the video that is output when there is no
audio input from any mic. If this is “OFF,” the last-
selected video continues to be output.
Time
Species the time after the video has switched until
audio detection resumes.
3. Touch <Video Follows Audio> to turn it “ON.”
The video follow audio function turns on.
4. Press the [MENU] button to close the menu screen.
MEMO
5
The “MIC 5” and “MIC 7” settings are valid only if the audio
sources of channels 5/6 and 7/8 (p. 24) are respectively mics.
5
This function does not operate simultaneously with the Audio
Follows function (p. 27). If this function is turned on, the Audio
Follows function automatically turns o.
Fading-In/Out the Program Output Video
Here’s how to perform a fade-out from the program output video to a
black screen, or a fade-in from a black screen to the program output
video.
A scene that you don’t want to output as video can be changed to a
black screen.
* A fade-in/out eect can be applied only if mix or wipe is selected as
the transition eect.
1. Press the [OUTPUT FADE] button.
Unlit: Normal output
Blinking: Fading-in/out
Lit: Faded-out completed
The program output video fades-out to a black screen.
When fade-out is complete, the [OUTPUT FADE] button is lit.
2. To fade-in, press the [OUTPUT FADE] button once again.
The [OUTPUT FADE] button blinks, and program output begins.
When fade-in is complete, the [OUTPUT FADE] button goes dark.
MEMO
5
You can also fade-in/out to a white screen.
Use the [MENU] button
0
System <Setup>
0
<
>
0
and
set Output Fade “Color” to “White.”
5
The time required for fade-in/out is determined by the setting
of the [TIME] knob.