Roland VR-50HD MK II - Network Settings; LAN Screen Configuration

55
Menu List
Network
LAN Screen
([MENU] button0< >0Network <LAN>)
Here you can make network-related settings.
Menu item Value (bold text: default value) Explanation
Status — Displays the connection status.
IP Address — Displays the IP address.
MAC Address — Displays the MAC address.
Subnet Mask — Displays the subnet mask.
Setup
— Accesses the LAN setup screen.
Menu item Value Explanation
Cong MANUAL, DHCP
Species whether the IP address and subnet mask are obtained automatically (DHCP)
or set manually (MANUAL).
IP Address (*17) 192.168.2.1 Species the IP address as appropriate for the network to which the unit is connected.
Subnet Mask (*17) 255.255.255.0
Species the subnet mask as appropriate for the network to which the unit is
connected.
(*17) This is valid if “Cong” is “MANUAL.”
Camera Screen
([MENU] button0< >0Network <Camera Control>)
Here you can make settings related to remote control of the cameras.
Menu item Value (bold text: default value) Explanation
Camera 1–6 Selects the camera to be controlled.
All Camera Recall
Species how presets are recalled.
OFF Recall presets from the camera that is being controlled.
ON Simultaneously recall presets from all cameras (CAMERA 1–6).
Store —
Stores the camera settings to a preset. Touch <Store> to make it light red, and then touch a “Camera
Preset” number to register the settings in a preset.
* Presets are saved in the camera itself.
Camera Preset 1–8 Recall presets.
Setup — Displays the Camera Setup screen (p. 56).
Positioner Adjust the horizontal/vertical position of the camera.
— While you touch the item, the camera faces left.
— While you touch the item, the camera faces right.
— While you touch the item, the camera faces up.
— While you touch the item, the camera faces down.
Speed 1–12–24 Adjusts the speed at which the camera changes direction.
Zoom Adjusts the camera’s zoom position.
Fast
Wide — While you touch the item, the camera zooms-out at high speed.
Tele — While you touch the item, the camera zooms-in at high speed.
Slow
Wide — While you touch the item, the camera zooms-out at low speed.
Tele — While you touch the item, the camera zooms-in at low speed.
Reset — Resets the zoom position.
Focus Adjusts the focal point of the camera.
Near — While you touch the item, the focus moves closer.
Far — While you touch the item, the focal point moves farther away.
Auto — If this is “ON,” the focal point is set automatically.
Exposure
Auto — Species the exposure mode (auto/manual). If this is on, auto mode is enabled.
TALLY
Ch 1–4
Species the number of the video input to which the camera’s video is being input. When the camera
video from this unit is the program output, the camera’s tally light is lit.