MC-101 Update – Functions Added in Ver.1.20
10
MIDI Input/Output Functions Added
Knob operations, switching clips, switches scenes, MIDI output
The following items are added to the system settings (MIDI tab).
Parameter Value Explanation
Control Channel
CH1, CH2, CH3…
CH16
Species the MIDI channel that switches scenes.
Control Tx OUT OFF, ON
Species whether scene changes are output to
MIDI OUT.
Control Tx USB OFF, ON
Species whether scene changes are output to
USB MIDI.
Control Rx OFF, ON
Species whether scene changes are received
from an external device.
The following items are added to the track settings (MIDI tab).
Parameter Value Explanation
Tx Note OFF, ON
Species whether the notes of each track are
output.
* This is not shown for a looper track.
Tx CC OFF, ON
Species whether knob operations of each
track are output.
Tx PC OFF, ON
Species whether clip changes of each track are
output.
Added Shortcuts
Operation Operation
Temporarily set the
sequencer playback
mode to random
Hold down the TRACK SEL [1]–[4] buttons of a tone/drum track, and
press the MEASURE [>] button.
Temporarily set the
sequencer playback
mode to reverse
Hold down the TRACK SEL [1]–[4] buttons of a tone/drum track, and
press the MEASURE [<] button.
Use the metronome Hold down the [TEMPO] button and press the [EXIT] button.
Added Metronome Function
You can now use a metronome function.
The metronome operates and sounds in synchronization with the
master clock.
The following parameter is added to the TEMPO screen.
Parameter Value Explanation
METRONOME ON, OFF
Species whether the metronome is used (ON)
or not used (OFF).
* You can also switch this on/o by holding down the
[TEMPO] button and pressing the [EXIT] button.
Problems Fixed
5
We xed the problem that had occasionally caused brief silence when
operating Scatter.
5
We xed the problem that had caused user sample settings to be
initialized when importing a WAV into the looper.
5
We xed the problem that had caused playback to be an incorrect pitch
when a WAV le of a sample rate other than 44.1 kHz was loaded into a
drum track instrument.
* If a project created in Ver.1.02 or earlier is loaded, the playback pitch
will be dierent if a sample rate other than 44.1 kHz is used in the
drum track.
5
We xed the problem in which the clip name was not correctly reected
when a WAV le was loaded into a clip.
5
We xed the problem in which freezing occurred when the 200th or later
le was selected in the project select screen or the WAV FILE select screen.
5
Other minor problems have been xed.
To Next Page
Loading...
Need help?
General
