Roland MC-202 - Page 17

ENTER
Step
Time
of
the
2nd
note
I
Edit
the
Step Time
and the
Gate
Time
you have
set.
The
Display
Window
shows the
Step
Time
of
the
next
step.
Unless the ENTER
key
is pressed, the
editing
is not completed. Therefore,
you
may set any
Step Time and Gate
Time
as
many
times
as you lil<e before
pressing
the ENTER
key.
If the
Gate Time of
the notes
are all dif-
ferent,
you
will
need to set the Gate Time
one
by one, but
if
the note has the same
Gate Time
as the one
before,
you just
need
to press the
ENTER
key,
so
that the
same Gate Time will
be
automatically
selected.
Entering
the dotted notes
and
dotted
rests
To
enter
dotted notes and
rests, press the
BAR
key instead of
the ENTER
key. e.
g.
press
)
key, then the
BAR key
instead
of
the ENTER
key for
J^.
,
and the
Step
Time
will be
36.
Entering
the rest
In entering
a rest, enter
the note which
has the
same
length
as the rest,
then press
theO
REST
key.
Refer
to the figure
below.
J.=
J
J
-*
c
BAR C
•
\
J.=
BAR
•
1
O
=
.m ,
J
=
-
J
=
»
.
;= r
^
=
7
,
If
editing is not
necessary.
STEP-
The Step
Time
of the next
step.
®
Pressing the STEP FWD
key
will
ad-
vance the
step counter one
step and
the
Display Window shows
the Step Time
of
the
next
step.
If
you have
completed entering
the
Step
Time
and the
Gate Time
data,
turn the
MC-202
to the Play
mode
by pressing
the
PLAY
key,
then the
music
can
be
played.
15