Roland MC-202 - Bar Line Functions and Measure Operations; 5. Useful Functions by Bars; B. Playing and Editing by Measure

[5]
Useful
functions by
bars
Playing or editing
from the measure
you select
Forwarding or
backing the whole
meas-
ure
Copying
the data
•
Deleting
the
whole
measure
•
Others
*
Refer to
P.
19 for
entering
the
bars.
A. How to set
the bars,
etc.
1
Measure
number display
Pressing
the SHIFT key
will display
which
measure you
are
entering.
(Except
for
the
data playing
mode).
In
the Play mode
While the data is
being
played,
the
current
measure
will be displayed.
Even when stop-
ped, the
measure
number will be displayed.
In
the Edit
mode
If entering the
data by
playing
the key-
board
or tapping
the
TAP key,
you
will see
the
Display
Window
change
with the
beep.
If
you enter
the data
with
the keys,
the
measure
number is not
displayed
at all.
2
How
to
forward
or
back the
whole
measure
Pressing the
MEAS FWD
key will forward
one measure and
MEAS BACK key
will
back
up one measure.
While the
MEAS
FWD
key
or
BACK key
is
being pressed,
the
display
window
shows
the measure
number.
On releasing
the key,
the Display
Window
shows
the first step in
that measure.
3
How
to
recall a
measure
You can recall any measure
by
doing as
follows.
SHIFT
NUMBER
key
The Step
Number
you like.
ENTER
B.
Playing
and
Editing from the measure you select
1
Playing
from
the
measure
you select
Select
a
measure
in
the
Play mode,
then
press
the
CONT
STOP
key,
and the
data
will
be
played
from
that
measure.
35