Keys, Buttons, and Actions Translation
On the MPC-4000: On the MV-8800:
LOAD key
• Load Project—PROJECT >
Keypad 3 > ENTER (Project
Load)
• Load Patch—INSTRUMENTS >
MENU > Keypad 2 > ENTER
• Assign Sounds—PROJECT >
Keypad 8 > ENTER
SAVE key Save Project—SHIFT + SHUTDOWN
buttons
SONG key SONG button
MIXER key Partial Edit Screen—
INSTRUMENTS > QUICK EDIT >
Select pad
MISC. key Song Screen parameters, or SONG
> F1 (Song Menu) > ENTER (Sync)
Sample Edit—SAMPLE key >
Select sample > F2
Edit Sample—QUICK EDIT > Select
pad > F1
GLOBAL key
• Pad/Panel Settings—SYSTEM
> Keypad 2 > ENTER > F1
(Pad) or F2 (Panel)
• System Info—SYSTEM >
Keypad 5 > ENTER
PROGRAM key Edit Patch—INSTRUMENTS >
Select patch > F5 (Patch Edit)
MIDI key MIDI Record Filter—Select MIDI
track > REC > F1 (Rec Filter)
NEXT SEQUENCE key In Pattern mode, F1 (Pattern
List)
TRACK MUTE key SHIFT + PAD BANK buttons
Keys, Buttons, and Actions Translation
On the MPC-4000: On the MV-8800:
Q1-Q4 knobs/Q5-Q6 sliders
• Slider—SYSTEM > Keypad 6 >
ENTER
• Set up effect knobs—
EFFECTS > F5 > Choose
effect block > F3 (Knob
Assign)
STEP keys
STEP buttons
GO TO + EVENT SHIFT + EVENT
BAR keys MEAS buttons
REC key REC button
OVERDUB key REC > Choose desired Overdub
setting
STOP key STOP button
PLAY key PLAY button
PLAY START key TOP button
MASTER TEMPO key BPM/TAP > F5 (T. Track On/Off)
toggle switch
NOTE REPEAT key
Available timings:
1/8, 1/8(3), 1/16, 1/16(3), 1/32,
1/32(3), 1/64, 1/64(3)
SHIFT+ROLL
Available note values:
960 = 1⁄2, 640 = 1⁄2(3),
480 = 1⁄4, 320 = 1⁄4(3),
240 = 1/8, 160 = 1/8(3),
120 = 1/16, 80 = 1/16(3),
60 = 1/32, 40 = 1/32(3),
30 = 1/64
To Next Page
Loading...
