MULTI-UNIT S-4000 SYSTEMS
Each S-4000 system’s Cat5e cable can transport up to 40 channels of high quality
24-bit 96kHz audio
The typical configuration for a basic system is 32x8 and consists of an S-4000S-3208 and an S-
4000H connected using one Cat5e cable, or (two when using redundant cables.)
For a 64x16 system, two separate 32x8 systems are specified using two independent Cat5e cables.
The typical configuration for this system is two S-4000S-3208 and two S-4000H units.
Each S-4000S is connected directly to an S-4000H via Cat5e cable.
Each of these systems is independent and therefore each system will have one MASTER unit and
one SLAVE unit as described above.
Be sure to power the S-4000 unit off and then on any time the REAC mode is changed.
To Previous Page
Loading...
