Roland UVC-02 User Manual

12
Conguring the Settings (UVC-02 Setup Tool)
4. Unplug the USB cable.
The power to the UVC-02 is turned o.
5. Reconnect the USB cable after a while (about ve
seconds).
The UVC-02 restarts, and a screen like the one below appears in the
Setup Tool.
6. To revert to the previous settings before updating, click
“YES”; and if you don’t need to revert, click “NO”.
You can save your settings to a le even if you’ve selected “NO”.

Roland UVC-02 Specifications

General

Brand	Roland
Model	UVC-02
Category	Projector Accessories
Language	English