Need help?Do you have a question about the Roland V-Drums TDW-1 and is the answer not in the manual?
General| Brand | Roland |
|---|---|
| Model | V-Drums TDW-1 |
| Category | Computer Hardware |
| Language | English |
Explains the meaning of WARNING and CAUTION notices used in the manual.
Details the meaning of warning symbols used throughout the manual for user safety.
Provides crucial safety guidelines for operating the unit and preventing hazards.
Provides essential precautions before handling and using the expansion board.
Explains how to effectively navigate and understand the manual's content for optimal use.
Highlights the new sounds and functions added by the TDW-1 expansion board.
Contains vital information regarding data saving before and after the upgrade process.
Details compatibility aspects and differences with non-expanded TD-10 systems.
Instructs on how to save current data before installing the TDW-1 expansion.
Provides step-by-step instructions for saving data onto a memory card.
Details the procedure for backing up data to an external MIDI device.
Provides a detailed guide on how to physically install the TDW-1 board into the TD-10.
Guides the user through loading the new program data after installation.
Explains how to load previously saved data into the expanded TD-10.
Details settings for trigger banks and types for various pads and cymbals.
Describes enhanced detection of subtle signals for improved playability.
Explains how to perform and configure the cross-stick playing technique.
Explains the new capability for positional sensing on all trigger inputs.
Details settings to prevent unwanted triggering due to crosstalk.
Guides on connecting and configuring the CY-15R V-Cymbal for various playing styles.
Explains how to achieve three-way triggering (bow, bell, edge) with the CY-15R.
Introduces new shortcut screens for faster navigation between functions.
Explains how to lock settings screens during performance to prevent accidental changes.
Describes the function of switching fader assignments for volume control of different instrument groups.
Explains how to set global output and pan destinations for all drum kits simultaneously.
Details how to adjust the volume level for the pedal hi-hat sound.
Explains the improved compressor settings and their increased strengths.
Guides on selecting instruments using group categories, including new TDW-1 instruments.
Explains using the hi-hat controller for pitch bending on assigned sounds.
Describes controlling pattern playback dynamics with pad velocity input.
Details how to back up individual drum kit settings via MIDI.
Explains adjusting the hi-hat note number for accurate MIDI transmission.
Provides methods to prevent crosstalk in mixed acoustic/electronic drum setups.
Guides on recording and playing patterns using the Tap Pattern function.
Explains how to synchronize the click sound with an external MIDI sequencer.
Lists the parameters that can be copied between different settings.
Lists all available instruments, including those added by the TDW-1.
Lists the TDW-1 preset drum kits and new kits added to the TD-10.
Details Percussion Group 1 and its instrument/trigger assignments.
Lists preset patterns, tempos, lengths, and types.
Explains important messages displayed by the TD-10, including data compatibility issues.
Provides a detailed map of MIDI parameter addresses and their functions.
To Next Page
