Roland VS-1680 - System Maintenance and Updates; System Software Update via SMF; System Software Update via Zip Disk

®ÂØÒÅÎ Supplemental Notes VS-1680 Frequently Asked Questions
7) Press YES and the VS-1680 will create a fade out
between those marker points.
8) Reset your song to a point before the first marker
and press PLAY to hear the fade out.
The User section within EZ Routing can be a huge time
saver. It can greatly simplify the set up process for
recording or mixing configurations that are frequently
used. These user programmable routing configurations
allow you to set up the VS-1680 exactly the way you
need, step by step, for a particular task. Then, when
you need to perform that same task in the future, you
just select that User template and your custom setup
will be recalled automatically. The following example will
show you how to create a User routing template for
recording inputs 1-8 to tracks 1-8 with a compressor
effect inserted on each input.
1) Press EZ ROUTING so it
is lit.
2) Press PAGE so that
INPUT is displayed
above F2.
3) Press F2 [INPUT] to dis-
play the Input Mixer
Settings (Fig. 7).
4) Use the CURSOR but-
tons and the
TIME/VALUE dial
to set the Send for
inputs 1-8 to tracks 1-8.
For example, the Send
for input 1 would appear
as 1/-.
5) Use the CURSOR buttons and TIME/VALUE dial to
set EFX 1 to INL for input 1 and INR for input 2.
6) Use the CURSOR buttons and TIME/VALUE dial to
set EFX 2 to INL for input 3 and INR for input 4.
7) Use the CURSOR buttons and TIME/VALUE dial to
set EFX 3 to INL for input 5 and INR for input 6.
1998 Roland Corporation U.S. VS-1680 Frequently Asked Questions Faxback # 21067 Page 10
Creating a Fade Out With Gradation (continued)
FFiigg..77 TThhee IInnppuutt
RRoouuttiinngg SSccrreeeenn iinn
EEZZ RRoouuttiinngg
TThhiiss pprroocceedduurree rreeqquuiirreess ttwwoo VVSS88FF--22 DDuuaall
SStteerreeoo EEffffeecctt EExxppaannssiioonn BBooaarrddss..
VIII. How Do I Create a User Template in EZ Routing?