EasyManua.ls Logo

Roland VS-1680 - Page 12

Roland VS-1680
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
®ÂØÒÅÎ Supplemental Notes VS-1680 Frequently Asked Questions
3) Hold the Track 15/16 STATUS button and press CLEAR.
4) Hold the Track 15/16 STATUS button and press the
TRACK SELECT 1-14 buttons consecutively so that
they are flashing.
5) Press the Track 15/16 STATUS button until it is set
to source mode (orange). Press the STATUS buttons
for tracks 1-14 until they are set to play mode(green).
6) Press PLAY and adjust the level and pan settings for tracks
1-14 as desired. Press STOP when you are finished.
7) Press the Track 15/16 STATUS button until it is set
to record ready mode (flashing red).
8) Reset your song to the beginning and press REC
followed by PLAY.
9) Press STOP when your song is finished playing. Now,
tracks 15 and 16 will contain a stereo mix of tracks 1-14.
10) Reset your song to the beginning, turn off tracks 1-14,
and press PLAY to hear the results. Make sure that the
EQ switch and all effects sends for tracks 15 and 16
are turned off. This will ensure that the bounced ver-
sion of tracks 1-14 sounds the same as the original.
If you are using effects, it can be beneficial to include
the output of the effects processor when you bounce
tracks. This is sometimes referred to as printing the
effects. By printing the effects you make them a perma-
nent part of the audio. By doing this you can free up the
effect processor to be used on a different track, or to
add a different effect on the same track. Use the follow-
ing procedure to bounce tracks 1-14 to tracks 15 and
16, with effects.
1) Assign tracks 1-14 to any of the available effects
processors (1-4) as desired.
2) Hold the Track 15/16 STATUS button and press
CLEAR.
3) Hold the Track 15/16 STATUS button and press the
TRACK SELECT 1-14 buttons consecutively so that
they are flashing.
4) Hold the Track 15/16 STATUS button and press the
EFF RTN button for all of the effects processors that
are being used. For example, to record Effect 1 to
tracks 15 and 16, hold the TRACK 15/16 STATUS
button and press EFFECT 1/3 RTN.
1998 Roland Corporation U.S. VS-1680 Frequently Asked Questions Faxback # 21067 Page 12
Bouncing Tracks (continued)
X. How Do I Bounce Tracks with Effects?

Other manuals for Roland VS-1680

Related product manuals