®ÂØÒÅÎ Supplemental Notes VS-1680 Frequently Asked Questions
While you are recording with the VS-1680, it will be
important to know exactly how much recording time is
available to you on the current hard drive (or, more
accurately, the current partition of that drive). The
VS-1680 will allow you to view this information in one
of the following forms:
Remaining Time - The amount of available time shown
in minutes and seconds.
Capacity MB - The amount of available space shown
in megabytes.
Capacity % - The amount of available space shown
in percentage.
Capacity Event - The amount of events available for
recording/automix.
Use the following procedure to select the format for
showing the amount of available space on the current
drive:
1) Hold SHIFT and press F5 [SYSTEM]. The System
Menu should be displayed. If it is not, press F6 [Exit].
2) Press F1 [SYSPM] followed by F2 [Prm 2].
3) Use the CURSOR buttons to highlight the Remain
Display icon and use the TIME/VALUE dial to select
the desired format (time, megabytes, percentage, or
events).
4) Press PLAY/DISPLAY to return to the main screen.
5) Hold SHIFT and press PLAY/DISPLAY until the name
of the current song is displayed. The amount of
space left on the drive will be indicated next to
REMAIN in the format selected in step #3
(Fig. 11).
How Do I Know How Big My Song Is?
In addition to viewing the remaining space on your hard
drive, it will also be important to know how many
megabytes your songs use. Use the following procedure
to view the size of the current song in megabytes:
1) Press PLAY/DISPLAY.
2) Hold SHIFT and press PLAY/DISPLAY until the name
of the current song is displayed (Fig. 12). The size
of the current song will be displayed in megabytes
next to Size: under the song name.
1998 Roland Corporation U.S. VS-1680 Frequently Asked Questions Faxback # 21067 Page 17
FFiigg..
1111
TThhee
RReemmaaiinniinngg
TTiimmee
DDiissppllaayy
XIV. How Do I Know How Much Time I Have Left On
My Hard Drive?/ How Many Megabytes Does My Song Use?
To Next Page
Loading...
