10
Error Messages
■
Drive Not Ready!
The disk drive is not yet ready. Please wait a moment.
■
Error Disc!
There is a problem with the hard disk or CD. The device or media in question cannot be used with the VS-2000. In the case of a
hard disk, you may be able to recover from this error by executing Drive Check. Please read “Drive Check” (Owner’s Manual).
■
Event Memory Full!
The project already contains all of the events it can hold. Delete unneeded automix data or perform a Project Optimize
operation.
■
Exceeding limit of RSS PAN Channels!
You have reached the maximum number of channels for which RSS pan can be used.
■
Finalized CD!
The CD is a commercial CD or a CD-R/RW disc you have already finalized. Replace the disc with a blank disc or one that has
not yet been finalized.
■
Found Illegal Track Pair!
■
Found Illegal Phrase Pair!
You attempted to perform region/phrase editing (copy/move/exchange, etc.) between a CDR mode mastering V-track and a
conventional V-track. Please re-select the track(s).
■
Hardware Error!
There is a problem with the disk drive. Contact the disk drive's manufacturer or dealer.
■
Illegal Phrase Pair!
You attempted to perform region/phrase editing (copy/move/exchange, etc.) between a CDR mode mastering V-track and a
conventional V-track. Please re-select the track(s).
■
Illegal Phrase Belongs to rhythm Track or Destination Track is rhythm Track.
You attempted to perform phrase editing on tracks 17/18, which are functioning as rhythm tracks. Please re-select the track(s).
Alternatively, switch tracks 17/18 so they function as audio tracks.
■
Illegal Request!
This disk drive cannot be used by the VS-2000.
■
Illegal Track!
You attempted to execute Phrase New between a CDR mode mastering V-track (take) and a conventional V-track (take). Please
re-select the track(s).
■
Illegal Track! Select Track includes Rhythm Track.
You attempted to perform region editing on tracks 17/18, which are functioning as rhythm tracks. Please re-select the track(s).
Alternatively, switch tracks 17/18 so they function as audio tracks.
■
Illegal Track Pair!
You attempted to perform region/phrase editing (copy/move/exchange, etc.) between a CDR mode mastering V-track and a
conventional V-track. Please re-select the track(s).
■
Invalid Disc!
It is not the ISO9660 format CD.
■
Lack Of Event!
You have tried to undo or redo when the remaining number of free project events is less than 200. This operation cannot be
performed.
■
Lack of IDE Memory!
There is insufficient free space on the disk. Erase unneeded data or select a different disk drive. The current disk partition
already contains 200 projects, the maximum number of projects it can hold. Delete unneeded projects or select a different disk
drive.
■
MARKER Memory Full!
The project already contains 1000 markers, the maximum number it can hold. Delete unneeded markers.
■
Medium Error!
There is a problem with the disk drive media or CD. This disk cannot be used by the VS-2000. In some cases, data in the disk
drive can be recovered using the Drive Check operation.
■
Message Error!
There is a problem with your disk drive connection. Make sure the disk drive is connected correctly.
VS-2000_e.book 10 ページ ２００５年１２月１２日 月曜日 午後４時５４分
To Next Page
Loading...
